15 49.0138 8.38624 1 0 4000 1 https://kaylamakes.com 300
theme-sticky-logo-alt
theme-logo-alt

DIY Tutorial- How to Layer Heat Transfer Vinyl On A Fleece Blanket

Superbowl season is here and like much of the nation, I am geared up to cheer on my favorite team. In today’s step-by-step tutorial I’m using my Cricut Maker and glitter heat transfer vinyl to create a layered sports logo on a fleece stadium blanket.

Difficulty Level: Moderate

Estimated Time To Complete: 30-40 mins

Care: Machine Washable

Supplies Needed:

Step One: Upload Images

Once you’ve uploaded the image you’re using into Design Space, change the colors of each layer to match the colors of heat transfer vinyl you’re using. Of course, this isn’t necessary but it keeps me from getting confused and cutting the wrong shapes out of the wrong color.

Click the make it button and then turn on the mirror option for each mat. Mirroring is always necessary when working with heat transfers.

Step Two: Cutting

Place the htv on the cutting mat with the glittered side facing down.

Load the cutting mat into the machine and cut each color one by one.

Step Three: Weeding

After all of the cuts are complete, use a weeding tool to remove the unwanted material from around the edges and inside the designs.

Step Four: HTV Application

I picked up this premade fleece stadium blanket from Hobby Lobby. It’s nice and thick and I love the fact that the hard work is done for me. It was $19.99 but after a 40% off coupon it was only $12. You can’t beat that price!

Preheat the fleece fabric with your iron for 15-20 seconds. Make sure to keep the iron moving, you don’t want to hold it in one spot for to long and burn the fleece.

Then, place the glittered heat transfer vinyl down on the blanket and press with a hot iron for 10-15 seconds. Heat settings vary from one iron to another but typically the cotton setting is a good place to start.

Wait at least one minute for the htv to cool down before removing the carrier sheet. If you peel the carrier sheet away too soon, you risk pulling the vinyl up with it.

Follow the same steps as above to layer the rest of the logo. Everyone tends to layer a little differently but I always start with the part of the design that will be the outermost layer. In this case, it’s the outline of the seahawks logo.

Then, it’s time to add in the smaller details. Just be sure to protect the first layer of htv with a carrier sheet or teflon sheet before ironing on the next layer.

Remove the carrier sheet and voila! I love the way this blanket turned out and I think it would make a great gift for the sports fan in your life.

Glittered htv is machine washable on the gentle cycle in cold water. It’s best to let htv’d items air dry but in a pinch I have placed mine in the dryer on the cool setting. If you have any wrinkling or peeling after washing, just cover it with a teflon sheet and use a hot iron to smooth it back down again.

 

Share:
Category:Cricut, DIY, Tutorials
PREVIOUS POST
DIY Tutorial – How To Apply Adhesive Vinyl On A Plastic Phone Case
NEXT POST
Problems Getting Heat Transfer Vinyl To Adhere? Try These Tricks!

2 Comments

  • May 14, 2020 at 7:54 pm
    mari

    Do you have additional football logos?
    I’m just starting and am finding your tutorials extremely helpful!
    Thank you

    REPLY
    • May 15, 2020 at 12:32 pm
      Kayla

      Hi Mari, so glad you’re finding the site helpful! I’d be happy to make any specific football decals for you! Just leave a comment or send me an email.

      REPLY

LEAVE A REPLY

Previous Next
Close
Test Caption
Test Description goes like this